i-matic electric actuator is a high-end intelligent integrated actuator. The actuator is operated via LC display and buttons. Parameters can set and adjusted in local or remote mode. It contains rich self-diagnostic functions, watchdog, electronic nameplate, operating and diagnostic data, and has a preventive valve diagnostic function...

Features: 

Valve interface, according to EN ISO 5210 o or EN ISO 5211 Main power supply 380 - 420 V 

DREHMO 3-phase squirrel-cage motor, insulation class F, 3 thermal protection switches 

Combined sensor for travel and torque detection

Control: 

Direction change: interlocked reverse contactor

Control: 4V DC, 3 1 isolated programmable instruction inputs

Status signals (programmable, isolated): 6 pairs of normally open contacts and 1 of reversing contact outputs 

Local control: 

4 multifunction buttons: Mode: local - OFF - remote - LEARN 

Menu navigation: up exit - down - confirm, (lockable)

Operating: open - stop - close

Output LED: 6 indicators (5 colors programmable): full off, off direction over torque, fault, on direction over torque, full on, Bluetooth (blue)

Interface: Bluetooth 

Protection class68, according to IEC 60529 

Ambient temperature -25°C ...  70°C 

Corrosion protection class C3 

Color RAL 5015 / sky blue 

Handwheel for manual operation / no clutch required 

rical connection: plug-in